|
 |
Tired of lugging heavy water bottles?
Go Bottle-Free and end the heavy lifting!
|
 |
For Ice Machines, Drink Dispensing Systems, Coffee Makers, Espresso Machines, Steamers And Combi-Ovens
|
|
|
|
|
|
|
|
|
|
|
|
|
R48 Series Industrial RO Systems
Four models for flow rates up to 100 GPM.
|
Standard Features
- Powder coated steel frames
- FRP multi-port pressure vessels
- Stainless steel pre-filter and cartridge
- Webtrol multi-stage centrifugal pump
- Automatic inlet valve
- Low-pressure shut-off with auto restart
- Tank level input
- Pretreatment interlock input
|
- Pre-filter pressure gauges
- Adjustable recycle line
- Pump discharge pressure gauge
- Flow meter for product water
- Flow meter for reject water
- Flow meter for recycle water
- Check valve for product water
- Sample valves for product water
- On / off switch
|
|
Specifications
| Feed water connection |
See below |
| Product water connection (40 & 60 GPM) |
2" Flange |
| Product water connection (80 & 100 GPM) |
2.5" Flange |
| Reject water connection |
1.5" Flange |
| Feed water pressure requirement (minimum) |
20 PSIG |
| Drain requirement (maximum) |
See below |
| Electrical requirement |
460VAC/60hz |
| Phase |
3 |
| Amps |
25, 30, 35, 40 |
|
Additional Features included with the R48 systems
- CL-1000 electronic controller with product water conductivity meter and alarm output
- Programmable concentrate auto flush
|
Models
All models feature membrane sizes of 8" x 40" and typical rejection of 98%.
Dimensions on all models are 186" x 72" x 26".
Model Number
|
GPM |
Feed Water Connection |
Pump (HP) |
Recovery (adjustable) |
Membrane Array |
Feed / Drain Required * (GPM) |
Ship Wt. |
R48-08-3131100 |
40 |
2" Flange |
15/TEFC |
65%-75% |
1:1 |
62 |
2500 |
R48-12-3131100 |
60 |
2.5" Flange |
20/TEFC |
65%-75% |
2:1 |
93 |
2800 |
R48-16-3131100 |
80 |
3" Flange |
25/TEFC |
65%-75% |
2:2 |
123 |
3200 |
R48-20-1311100 |
100 |
3" Flange |
30/TEFC |
65%-75% |
3:2 |
154 |
3500 |
*At 65% recovery.
NOTES: Performance specifications are based on 77 degree feed water, 3 SDI or less, TDS below 1000 and pH of 8. Individual membrane productivity and rejection rates are based on membrane manufacturer's specifications. Chlorine reduction and other pretreatment may be required. Systems are designed for use with municipal and well water. |
Click here for pricing and purchase options |
|
